SN-TT104
SN-TT104 · 40oz Leak-Tested Straw Tumbler
A handled 40oz straw tumbler for US promotional and retail programs where lid leakage can become the costliest repeat-order complaint.
- 500 pcs baseline MOQ
- 5–7 working day catalog sample
- Invert-and-shake lid test
- Four decoration processes in-house
| Capacity | 40oz |
|---|---|
| Category | Tumblers & Mugs |
| Type | vacuum insulated |
| Material | Double-wall stainless steel (304 inner / 201 outer) |
| Insulation | Vacuum insulated |
| Lid | ABS push with straw lid |
| Handle | pp handle |
| Size | 8.2 × 10.3 × 27.4 cm (40oz) |
| Weight | 527 g |
| Packing | 30oz: 24pcs / ctn Carton: 68*68*25.5cm 40oz: 24pcs / ctn Carton: 68*68*29.4cm N.W / G.W:12.7 / 14.2kgs |
Procurement specs
| Material | Double-wall stainless steel (304 inner / 201 outer), PP handle, ABS straw lid |
|---|---|
| Capacity | 40oz |
| Thermal retention | Catalog target: 24h hot / 12h cold. Confirm on the approved sample before any market claim. |
| Certificates | LFGB and FDA reports for this model and lid. Factory audits: BSCI, WCA, SQP. |
| MOQ | 500 pcs per design |
| Sample lead | 5–7 working days after artwork approval |
| Bulk lead | 15 days at 500 pcs, after sample approval (lid, decoration, and packing confirmed) |
Procurement Decision Snapshot
| MOQ baseline | 500 pcs |
|---|---|
| Sample lead time | Typically 5-7 working days on catalog SKUs after artwork confirmation. |
| Compliance files | Model-linked LFGB/FDA reports and factory audit summaries can be shared for qualified procurement review. |
Product Features
- Straw-lid and PP-handle format built for high-visibility US retail and promotional campaigns
- Pre-shipment invert-and-shake leak test checks lid gasket fit before export packing
- Large decoration area with laser, UV, heat transfer, and sublimation handled in-house
- BPA-free; catalog target: 24h heat / 12h cold; validate against approved sample before market claims
- Double-wall construction with 304 stainless steel inner and 201 stainless steel outer
Recommended Buyer Fit
- US promotional programs needing a large logo panel
- Retail private-label launches built around 40oz demand
- Marketplace sellers requiring repeatable lid QC
Better alternative: If closure security matters more than straw convenience, compare the screw-lid SN-TT108.
OEM Customization
Laser engraving, UV printing, heat transfer, and sublimation are handled in-house. Use laser or UV for logos; use heat transfer or sublimation for wraparound campaign artwork. Body color and packaging can be matched to the approved sample.
- Laser or UV for logos and personalization
- Heat transfer or sublimation for wraparound artwork
- Body color matching and custom retail packaging
Factory Process Proof
Real factory images from the QC, in-house decoration, and finished-carton stages supporting this OEM program.
Reference Production Schedule
| Quantity | Production time |
|---|---|
| 500 pcs | 15 days |
Downloads and Procurement Documents
Request model-specific files for internal sourcing review and supplier onboarding.
Supplier Verification Links
Use these pages for internal vendor review and AI-assisted sourcing checks.
Buyer FAQ for This Model
What is the lead time for SN-TT104?
15 days
Can SN-TT104 support custom packaging?
Yes. Packaging baseline: 30oz: 24pcs / ctn Carton: 68*68*25.5cm 40oz: 24pcs / ctn Carton: 68*68*29.4cm N.W / G.W:12.7 / 14.2kgs
Which compliance files can be requested for SN-TT104?
Model-linked LFGB/FDA reports and factory audit summaries can be shared for qualified procurement review.
Does this lid pass an invert leak test?
Yes. Production units are checked with invert-and-shake leak tests on gasket fit and thread alignment before export packing.
Will this tumbler fit a standard car cup holder?
Base dimensions are confirmed per SKU during quote review — share your target vehicle cup-holder spec if retail packaging requires it.
Is the straw lid sealed for promo and retail programs?
Straw-lid models are validated for sealing at sample approval; bulk runs follow the approved gasket and thread specification.
Are you a 40oz tumbler factory in China?
Yes. SN-TT104 is our Jinhua factory 40oz straw-lid + handle SKU for OEM wholesale — invert leak-test QC before export, in-house logo, samples typically 5–7 working days after artwork.
Do you wholesale 40oz insulated tumblers with straw lid and handle?
Yes. SN-TT104 is a 40oz insulated tumbler with ABS push straw lid and PP handle, built for OEM/wholesale programs with in-house logo options.
40oz vs 30oz tumbler — which should OEM buyers choose?
Choose 40oz (SN-TT104) for US retail/promo capacity and straw-lid drinking; choose 30oz when carton density or cup-holder fit matters more. Lid path (straw vs screw) should be locked before sample.
What certifications apply to SN-TT104 for EU/US buyers?
LFGB and FDA food-contact test reports are available for qualified buyers; factory audits include BSCI, WCA, and SQP.
Ideal for corporate gifts, brand merchandise, distributor private label, and retail programs.
